Yayınlar

Mezuniyet Tezleri:

Doktora (2002)

Tez Başlığı: “Analysis of Forming Limits Using Ductile Fracture Criteria”

Danışman: Prof. Dr. Daeyong Lee

Yüksek Lisans (1995)

Proje Başlığı: “Three Disk Shrink Fit Problem”

Danışman: Prof. Dr. T. C. Woo

Kitaplar:

  1. Fahrettin Öztürk, Memorables of Aviation History, TUSAŞ – Türk Havacılık ve Uzay Sanayi A.Ş. Yayınları, ISBN: 978-625-99178-0-1, Haziran 2023, Ankara.
  2. Fahrettin Öztürk, Ar-Ge ve Teknolojiyi Anlamak, Yade Kitap, ISBN: 978-605-70961-4-2, Mart 2022, Ankara.
  3. Fahrettin Öztürk, Başarıya Giden Yolda Prensipler, Yade Kitap, ISBN: 978-605-70961-3-5, Ekim, 2021, Ankara.

Kitap Bölümleri:

  1. Rafet Bozdoğan, Temel Kotil, Fahrettin Öztürk, TUSAŞ’ın Teknolojik Gelişimi, Milli Teknoloji Hamlesi: Toplumsal Yansımaları ve Türkiye’nin Geleceği, Türkiye Bilimler Akademisi Yayınları, ISBN 978-625-8352-16-0, 523-543, 2022.
  2. Tanju Deveci, Fahrettin Öztürk, Mühendisler için hayat boyu öğrenme becerileri, Geleceğin Mühendisi, Paradigma Akademi, ISBN 978-625-8187-82-3, 301-322, 2022.
  3. İlyas Kacar, Süleyman Kılıç, Fahrettin Öztürk, Mühendis kimdir? Geleceğin Mühendisi, Paradigma Akademi, ISBN 978-625-8187-82-3, 31-60, 2022.
  4. Ilyas Kacar, Fahrettin Ozturk, Advances in Stamping, Modern Manufacturing Technologies, Edited by Muammer Koc and Tugrul Ozel, John Wiley and Sons Inc., Haboken, NJ, A.B.D., ISBN 9781119120391 (epub)- ISBN 9781118071922 (hardcover), 3-13, 2020.
  5. Fahrettin Ozturk, Serkan Toros, Ilyas Kacar, Warm Stamping, Modern Manufacturing Technologies, Edited by Muammer Koc and Tugrul Ozel, John Wiley and Sons Inc., Haboken, NJ, A.B.D., ISBN 9781119120391 (epub)- ISBN 9781118071922 (hardcover), 187-218, 2020.
  6. Fahrettin Ozturk, Ilyas Kacar, Muammer Koc, Hot Stamping, Modern Manufacturing Technologies, Edited by Muammer Koc and Tugrul Ozel, John Wiley and Sons Inc., Haboken, NJ, A.B.D., ISBN 9781119120391 (epub)- ISBN 9781118071922 (hardcover), 239-264, 2020.
  7. Süleyman Kılıç, İlyas Kacar, Fahrettin Ozturk, Serkan Toros, Sonlu Elemanlar Analizlerinde Sac Metal Şekillendirme Parametrelerinin İncelenmesi, Geleceğin Dünyasinda Bilimsel ve Mesleki Çalişmalar, Mühendislik ve Teknoloji, Ekin Basım Yayın Dağıtım, 271-291, 2018.
  8. Ozturk, F., Evis, Z., and Kilic, S., Hot Dip Galvanizing Process, Edited by Hashmi, M.S.J., Comprehensive Materials Finishing, Oxford: Elsevier, 3, 178-190, 2016.
  9. Fahrettin Ozturk, Tanju Deveci, Ebru Gunister, Rodney Rodney J. Simmons, Innovative Instructional Strategies for Teaching Materials Science in Engineering, Handbook of Research on Recent Developments in Materials Science and Corrosion Engineering Education, IGI Global, Editor: Hwee Lim, ISBN 978-1-4666-8183-5 (hardcover) — ISBN 978-1-4666-8184-2 (ebook), 100-117, 2015.

Kitap Çevirisi:

  1. Fahrettin Öztürk ve İlyas Kacar, Modern İmalatın Prensipleri – Principles of Modern Manufacturing, Mikell P. GROOVER-ISBN: 978-605-320-054-3 (Bölüm 3, 16, 18 ve 25)

Uluslararası Hakemli Dergilerde Yayımlanan Makaleler (SCI/SCI-Expanded):

  1. Bahadir Ozcan, Zafer Evis, Fahrettin Ozturk, Effect of mandrel position on bending quality in the rotary draw bending process, Journal of Materials: Design and Applications (Basımda).
  2. Elvan Ates, Zafer Evis, Fahrettin Ozturk,Comparative Review of Machinability in AA2XXX and AA7XXX Heat-Treatable Aluminum Alloys: Focus on AA7050-T7451 and AA2050-T84, Journal of Process Mechanical Engineering, 240 (2), 232-249, 2026.
  3. Suleyman Kilic, Fahrettin Ozturk, Mehmet Fatih Demirdogen, Investigation of weldability in friction stir welding of aluminum alloys AA5754 and AA2024, Journal of Materials Engineering and Performance, 34 (13), 13247–13258, 2025.
  4. Zelal Yavuz, Remzi Ecmel Ece, Yahya Oz, Fahrettin Ozturk, Investigation of sizing materials for carbon fiber reinforced thermoplastic composites; Journal of Thermoplastic Composite Materials, 38(5), 1799-1817, 2025.
  5. Suleyman Kilic, Fahrettin Ozturk, Mehmet Fatih Demirdogen, A comprehensive literature review on friction stir welding: process parameters, joint integrity, and mechanical properties, Journal of Engineering Research, 13 (1), 122-130, 2025.
  6. Fahrettin Ozturk, Merve Cobanoglu, Remzi Ecmel Ece, Recent Advancements in Thermoplastic Composite Materials in Aerospace Industry, Journal of Thermoplastic Composite Materials, 37 (9), 3084-3116, 2024.
  7. Yasemin Sumeyye Yildirimoglu, Fahrettin Ozturk, Advances in mechanical and physicochemical performances of recycled carbon fiber reinforced PEKK composites, Polymer Bulletin, 81, 14453-14478, 2024.
  8. Yasemin Sümeyye Türker, Fahrettin Öztürk, Yahya Öz, Review of recycling methods of thermoplastic composite materials, Polymer-Plastics Technology and Materials, 63 (12), 1693-1713, 2024.
  9. Aysun Guven Citir, Serkan Toros, Fahrettin Ozturk, Experimental and numerical investigations of induction heating for Ti-6Al-4V sheets and epoxy/carbon fiber composite laminates, Journal of Engineering Research, 12 (2), 256-265, 2024.
  10. Merve Çobanoğlu, Remzi Ecmel Ece, Yahya Öz, Serkan Toros, Fahrettin Öztürk, Investigation of Thermoforming Processes of Aerospace Parts: Simulation and Microstructural Analysis, The International Journal of Advanced Manufacturing Technology, 132, 5039-5052, 2024.
  11. Bengu Yildiz Zeyrek, Buse Aydogan, Esra Dilekcan, Fahrettin Ozturk, Experimental investigation of the recycling of carbon fiber polyetherketoneketone thermoplastic composite, Journal of Thermoplastic Composite Materials, 37 (5), 1859-1876, 2024.
  12. Elvan Ates, Zafer Evis, Fahrettin Ozturk, Machining Parameters and Distortion Analyses in End Milling of AA2050 and AA7050, Int J Adv Manuf Technol, 128, 2915-2929, 2023.
  13. Mustafa Yildiz, Fahrettin Ozturk, Jamal Sheikh-Ahmad, A Comprehensive Review on Friction Stir Welding of High-Density Polyethylene, Arabian Journal for Science and Engineering, 48, 11167-11210, 2023.
  14. Osman Atalay, Fahrettin Ozturk, Effects of gripper location and blank geometry on the thermoforming of a carbon-fiber woven-fabric/ polyphenylene sulfide composite sheet, Journal of Thermoplastic Composite Materials, 36 (7), 2737-2756, 2023.
  15. Halil Yildirim, Nazli Uren, Fahrettin Ozturk, Effects of spring gripper configuration and forming temperature on the thermo-stamping of a carbon-fiber woven-fabric / Polyphenylene sulfide composite sheet, Measurement Science and Technology, 34 (8), 085602, 2023.
  16. Mustafa Okan Ture, Zafer Evis, Fahrettin Ozturk, Additive manufacturing of hexagonal lattice structures: Tensile tests and validation, Materials Testing, Material Testing, 65 (4), 505-511, 2023.
  17. Yalcin Tamer, Serkan Toros, Fahrettin Ozturk, Numerical and Experimental Comparison of Fractural Characteristics of 316L Stainless Steel, J Mater Eng Perform, 32 (3), 1103-1118, 2023.
  18. Hatice Gunduz, Ramazan Karslioglu, Fahrettin Ozturk, Microstructural Evaluation of Graphene-Reinforced Nickel Matrix Ni-P-Gr Coating on Ti-6Al-4V Alloy by the Electroless Coating Method, Coatings, 12 (12), 1827, 1-15, 2022.
  19. Burak Ocak, Zafer Evis, Fahrettin Ozturk, Optimization of spur gear pairs for aerospace applications, Material Testing, 64 (11), 1687-1698, 2022.
  20. Jabbar Gattmah, Fahrettin Ozturk, Suha K. Shihab, Sadettin Orhan, Influencing the residual stresses in tubes drawn with a floating plug by changing tool parameters, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44: 298, 1-14, 2022.
  21. Halil Yıldırım, Fahrettin Ozturk, A Benchmark Study of the Material Models for Forming Simulation of Woven Fabrics, The Journal of the Textile Institute, 113 (6), 1027-1038, 2022.
  22. Samed Enser, Hakan Yavas, Burcu Arslan Hamat, Hüseyin Aydın, Gülten Kafadar, A. Alptuğ Tanrıkulu, Havva Zeytin Kazdal, Fahrettin Ozturk, Mustafa Güden, Comparing compression deformation and rate sensitivity of additively manufactured and extruded-annealed 316L alloys, J Mater Eng Perform, 30 (12), 8840, 2021.
  23. Tunc, I Kacar, F Ozturk, Investigation of Forging Performance for AA6082, Int J Adv Manuf Technol, 117, 1645-166, 2021.
  24. Jiansha Dong, Fahrettin Ozturk, Ana Nieto, Tianye Guo, Firas Jarrar, Jamal Y. Sheikh-Ahmad, Analysis of Process Parameters for Different Material Pairs of Mechanically Lined CRA Pipes Manufactured by Thermal-Hydraulic Expansion Process, The Journal Tehnički vjesnik – Technical Gazette, 28 (5), 1442-1447, 2021.
  25. Ilyas Kacar, Fahrettin Ozturk, Serkan Toros, Suleyman Kilic, Prediction of Strain Limits via Marciniak-Kuczynski Model and Novel Semi Empirical Forming Limit Diagram Model for Dual Phase DP600 Advanced High Strength Steel, Strojniški vestnik – Journal of Mechanical Engineering, 66 (10), 602-612, 2020.
  26. Suleyman Kilic, Fahrettin Ozturk, Serkan Toros, Analysis of yield criteria and flow curves on FLC for TWIP900 steel, Experimental Techniques, 44, 597-612, 2020.
  27. Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan, A new development of measurement technique for residual stresses generated by the cold tube drawing process with a fixed mandrel, Int J Adv Manuf Technol, 108, 3675-3687, 2020.
  28. Guangwen Dai, Firas Jarrar, Fahrettin Ozturk, Jamal Sheikh-Ahmad, Zemin Li, An Accurate Constitutive Model for AZ31B Magnesium Alloy during Superplastic Forming, Metals, 9, 1273, 1-20, 2019.
  29. Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan, Numerical Simulation of Bending Process for Steel Plate Using Finite Element Analysis, Arabian Journal for Science and Engineering, 44, 10285-10292, 2019.
  30. Suleyman Kilic, Ilyas Kacar, Mevlut Sahin, Fahrettin Ozturk, Oguz Erdem, Effects of Aging Temperature, Time, and Pre-Strain on Mechanical Properties of AA7075, Materials Research, 22 (5), 1-13, 2019.
  31. Suleyman Kilic, Ilyas Kacar, Fahrettin Ozturk, Havacılık Endüstrisinde Yeni Trend: Al-Li Esaslı Alaşımları, Gazi Üniv. Müh. Mim. Fak., 34 (1), 275-296, 2019.
  32. Serkan Toros, Fahrettin Ozturk, 3D Microstructural Finite Element Simulation of Martensitic Transformation of TRIP Steels, Latin American Journal of Solids and Structures, 15 (7), 1-13, 2018.
  33. S. Kilic, F. Ozturk, R.C. Picu, Investigation of the Performance of Flow Models for TWIP Steel, J Mater Eng Perform, 27 (8), 4364-4371 2018.
  34. Ilyas Kacar, Ismail Durgun, Fahrettin Ozturk, Rodney J. Simmons, A review of light duty passenger car weight reduction impact on CO2 emission, Int. J. Global Warming, 15 (3), 333-349, 2018.
  35. Z. Hou, J. Sheikh-Ahmad, F. Jarrar, F. Ozturk, Residual Stresses in Dissimilar Friction Stir Welding of AA2024 and AZ31: Experimental and Numerical Study, J. Manuf. Sci. Eng., 140, 051015- 051015-10, 2018.
  36. Jiansha Dong, Fahrettin Ozturk, Firas Jarrar, Jamal Y. Sheikh-Ahmad, Numerical Post-Buckling Analysis of Mechanically Lined Corrosion Resistant Alloy Pipes, J. Pressure Vessel Technol, 140, 014502-1014502-4, 2018.
  37. Zemin Li, Guangwen Dai, Jing Shi, Firas Jarrar, Fahrettin Ozturk, Jamal Ahmad, Using the Particle Swarm Optimization Method for the Constitutive Modeling of AZ31B, Material Science and Engineering Technology (Mat.-wiss. u. Werkstofftech.), 48, 993–997, 2017.
  38. Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan, Experimental and finite element analysis of residual stresses in cold tube drawing process with a fixed mandrel for AISI 1010 steel tube, Int J Adv Manuf Technol, 93, 1229-1241, 2017.
  39. Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan, Effects of process parameters on hot extrusion of hollow tube, Arab J Sci Eng, 42, 2021-2030, 2017.
  40. Suleyman Kilic, Fahrettin Ozturk, Evaluation of formability under different deformation modes for TWIP900 steel, J. Eng. Mater. Technol, 139, 031001-031001-8, 2017.
  41. Tianye Guo, Fahrettin Ozturk, Firas Jarrar, Jamal Y. Sheikh-Ahmad, Analysis of Contact Pressure of Mechanically Lined Pipe by Hydraulic Expansion Process, J. Pressure Vessel Technol, 139, 021212-021212-7, 2017.
  42. Fahrettin Ozturk, Remzi Ecmel Ece, Naki Polat, Arif Koksal, Zafer Evis, Jamal Y. Sheikh-Ahmad, Application of Electric Resistance Heating Method on Titanium Hot Forming at Industrial Scale, Arab J Sci Eng, 41, 4441-4448, 2016.
  43. J.Y. Sheikh-Ahmad, F. Ozturk, F. Jarrar, Z. Evis, Thermal History and Microstructure during Friction Stir Welding of Al-Mg Alloy, Int J Adv Manuf Technol, 86, 1071-1081, 2016.
  44. Suleyman Kilic, Fahrettin Ozturk, Comparison of Performances of Commercial TWIP900 and DP600 Advanced High Strength Steels in Automotive Industry, Journal of the Faculty of Engineering and Architecture of Gazi University, 31 (3), 567-578, 2016.
  45. Ilyas Kacar, Fahrettin Ozturk, Bekir Sami Yilbas, A Review and Current State-of-the-Art of Laser Beam Welding in the Automotive Industry, Lasers in Eng, 33 (4-6), 327-338, 2016.
  46. Aytekin Polat, Mustafa Avsar, Fahrettin Ozturk, Effects of Artificial Aging Temperature and Time on Mechanical Properties and Springback Behaviors of AA6061, Materiali in Tehnologije/Materials and Technology, 49 (4), 487-493, 2015.
  47. S. Kilic, F. Ozturk, T. Sigirtmac, G. Tekin, Effects of pre-strain and temperature on bake hardening of TWIP900CR steel, J Iron Steel Res Int, 22 (4) 361-365, 2015.
  48. Murat Dilmeç, Hüseyin Selçuk Halkaci, Fahrettin Öztürk, Al 2024-T4 Alaşımının Nakajima Testi İle Elde Edilen Şekillendirme Sınır Eğrisinin Minimum Majör Değerinin Ötelenme Nedenlerinin İncelenmesi, Gazi Üniv. Müh. Mim. Fak. Der., 29 (3), 527-536, 2014.
  49. Mevlut Turkoz, H. Selcuk Halkaci, Osman Yigit, Murat Dilmec, Fahrettin Ozturk, A New Method for Determining Limit Strains of Materials Show Post-Uniform Elongation Behavior, P I Mech Eng B-J Eng, 228 (3), 450-457, 2014.
  50. Umit Kockan, Fahrettin Ozturk, Zafer Evis, Artificial Neural Networks Prediction of Hexagonal Lattice Parameters for Non-stoichiometric Apatites, Materiali in Tehnologije/Materials and Technology, 48 (1), 73-79, 2014.
  51. Murat Dilmec, Huseyin Selcuk Halkaci, Fahrettin Ozturk, Mevlut Turkoz, Effect of Sheet Thickness on Anisotropy and Thickness Distribution for AA 2024-T4, Materiali in Tehnologije/Materials and Technology, 47(5), 605–610, 2013.
  52. Murat Dilmec, H.Selcuk Halkaci, Fahrettin Ozturk, Haydar Livatyali, Osman Yigit, Effects of sheet thickness and anisotropy on forming limit curves of AA2024-T4, Int J Adv Manuf Technol, 67, 2689-2700, 2013.
  53. Fahrettin Ozturk, Remzi Ecmel Ece, Naki Polat, Arif Koksal, Zafer Evis, Aytekin Polat, Mechanical and Microstructural Evaluations of Hot Formed Titanium Sheets by Electrical Resistance Heating Process, Mat Sci Eng A-Struct, 578, 207-214, 2013.
  54. F. Ozturk, A. Polat, S. Toros, R. C. Picu, Strain Hardening and Strain Rate Sensitivity Behaviors of Advanced High Strength Steels, J Iron Steel Res Int, 20 (6) 68-74, 2013.
  55. Dilmec, Murat, Halkaci, H. Selcuk, Ozturk, Fahrettin, and Turkoz, Mevlut, Detailed Investigation of Forming Limit Determination Standards for Aluminum Alloys, Journal of Testing and Evaluation, 41(1), 10-21, 2013.
  56. S. Toros, A. Polat, F. Ozturk, Formability and Springback Characterization of TRIP800 Advanced High Strength Steel, Mater Design, 41, 298-305, 2012.
  57. S. Toros, M. Alkan, R.E. Ece, F. Ozturk, Effect of Pre-Straining on the Springback Behavior of the AA 5754-0, Materiali in Tehnologije/Materials and Technology, 45 (6), 25-32, 2011.
  58. F. Ozturk, Finite Element Modeling of Two Disk Shrink Fit Assembly and Evaluation of Material Pairs of Disks, P I Mech Eng C-J Mec, 225 (2), 263-273, 2011.
  59. Serkan Toros, Fahrettin Ozturk, Flow curve prediction of Al-Mg alloys under warm forming conditions at various strain rates by ANN, Appl Soft Comput, 11 (2), 1891-1898, 2011.
  60. Fahrettin Ozturk, Hakan Pekel, Huseyin S. Halkaci, The Effect of Strain Rate Sensitivity on Formability of AA 5754-O at Cold and Warm Temperatures, J Mater Eng Perform, 20 (1), 77-81, 2011.
  61. Catalin R. Picu, Fahrettin Ozturk, E. Esener, Renge Li, Aluminum Alloys with Identical Plastic Flow and Different Strain Rate Sensitivity, Metall Mater Trans A, 41A (13), 3358-3364, 2010.
  62. Ahu Fahriye Acar, Fahrettin Ozturk, Mustafa Bayrak, Effects of Variations in Alloy Content and Machining Parameters on the Strength of the Intermetallic Bonding Between A Diesel Piston and A Ring Carrier, Materiali in Tehnologije/Materials and Technology, 44 (6), 391-395, 2010.
  63. Emre Esener, Fahrettin Ozturk, Mustafa Yenice, An Investigation of Use Biaxial Data in Sheet Metal Forming Simulations, steel research int, 81 (9), 1412-1415, 2010. (13th International Conference on Metal Forming, Sept. 19 – 22, 2010, Hotel Nikko Toyohashi, Toyohashi, Japan konferansında sunulmuştur).
  64. Emrah Uysal, Fahrettin Ozturk, Analysis of Forming Limit Diagrams of DP600 Steel at Various Deformation Speeds, steel research int, 81 (9), 837-840, 2010. (13th International Conference on Metal Forming, Sept. 19 – 22, 2010, Hotel Nikko Toyohashi, Toyohashi, Japan konferansında sunulmuştur).
  65. Fahrettin Ozturk, Remzi Ecmel Ece, Naki Polat, Arif Koksal, Effects of Warm Temperature on Springback Compensation of Titanium Sheet, Mater Manuf Process, 25 (9), 1021-1024, 2010.
  66. F. Ozturk, S. Toros, S. Kilic, Tensile Deformation Behavior of AA5083-H111 at Cold and Warm Temperatures, Int. J. Mat. Res. (formerly Z. Metallkd.), 101 (9), 1172-1179, 2010.
  67. Serkan Toros, Fahrettin Ozturk, Modeling Uniaxial, Temperature and Strain Rate Dependent Behavior of Al-Mg Alloys, Comp Mater Sci., 49 (2), 333-339, 2010.
  68. F. Ozturk, E. Esener, S. Toros, R.C. Picu, Effects of Aging Parameters on Formability of 6061-O Alloy, Mater Design, 31 (10), 4847-4852, 2010.
  69. F. Ozturk, A. Sisman, S. Toros, S. Kilic, R.C. Picu, Influence of Aging Treatment on Mechanical Properties of 6061 Aluminum Alloy, Mater Design, 31 (2), 972-975, 2010.
  70. Fahrettin Ozturk, Serkan Toros, Suleyman Kilic, Tensile and Springback Behavior of DP600 Advanced High Strength Steel at Warm Temperatures, J Iron Steel Res Int, 16(6) 41-46, 2009.
  71. F. Ozturk, S. Toros, H. Pekel, Evaluation of Tensile Behavior of 5754 Aluminum-Magnesium Alloy at Cold and Warm Temperature, Mater Sci Tech-Lond, 25 (7), 919-924, 2009.
  72. Fahrettin Ozturk, Serkan Toros, Suleyman Kilic, Muhammet H Bas, Effects of Cold and Warm Temperatures on Springback of AA 5083-H111, P I Mech Eng B-J Eng, 223 (4), 427-431, 2009.
  73. Fahrettin Ozturk, Serkan Toros, M. Hakan Bas, Suleyman Kilic, Evaluation of Tensile Properties of High Strength Steels at Warm Temperatures and Various Strain Rates, steel research int., 79 Special Edition Metal Forming Conference 2008, Volume 2, 295-300, 2008.
  74. Serkan Toros, Fahrettin Ozturk, Ilyas Kacar, Review of Warm Forming of Aluminum-Magnesium Alloys, J Mater Process Tech, 207 (1-3), 1-12, 2008.
  75. Zafer Evis, Fahrettin Ozturk, Investigation of Tensile Strength of Hydroxyapatite with Various Porosities by Diametral Strength Test, Mater Sci Tech-Lond, 24 (4), 474-478, 2008.
  76. Mustafa Bayrak, Fahrettin Ozturk, Mehmet Demirezen, Zafer Evis, Analysis of Tempering Treatment on Material Properties of DIN 41Cr4 and DIN 42CrMo4 Steels, J Mater Eng Perform, 16 (5), 597-600, 2007.
  77. Fahrettin Ozturk and Daeyong Lee, New Methodology for Ductile Fracture Criteria to Predict the Forming Limits, J Mater Eng Perform, 16 (2), 224-228, 2007.
  78. Fahrettin Ozturk and Daeyong Lee, Experimental and Numerical Analysis of Out-of-Plane Formability Test, J Mater Process Tech, 170 (1-2), 247-253, 2005.
  79. R. C. Picu, G. Vincze, F. Ozturk, J. J. Gracio, F. Barlat, and A. M. Maniatty, Strain Rate Sensitivity of the Commercial Aluminum Alloy AA5182-O, Mat Sci Eng A-Struct, 390 (1-2), 334-343, 2005.
  80. Fahrettin Ozturk and Daeyong Lee, Analysis of Forming Limits Using Ductile Fracture Criteria, J Mater Process Tech, 147 (3), 397-404, 2004